manualshive.com logo in svg

KTM 2016 690 DUKE R, Owner'S Manual

The KTM 2016 690 DUKE R comes with an indispensable Owner's Manual that provides comprehensive guidance on operating and maintaining the bike. You can easily download this manual for free from manualshive.com, ensuring that you have all the necessary information to optimize your experience with this exceptional motorcycle.

Share
Download
background image

13

BRAKE SYSTEM

103

13.5

Adding front brake fluid

Warning

Danger of accidents

 

Brake system failure.

–

If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is
leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-
rized KTM workshop will be glad to help.)

Warning

Skin irritation

 

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.

Warning

Danger of accidents

 

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

Warning

Environmental hazard

 

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake
fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.

Summary of Contents for 2016 690 DUKE R
















































































































































































































Reviews:

No comments

Related manuals for 2016 690 DUKE R

TVS Apache RTR 160 HYPER EDGE 2015 Owner'S Manual preview
Apache RTR 160 HYPER EDGE 2015
Brand: TVS Pages: 60
Cobra 2003 CH2 Owner'S Service Manual preview
2003 CH2
Brand: Cobra Pages: 38
Dakota Digital MLX-3000 Manual preview
MLX-3000
Brand: Dakota Digital Pages: 11
X-lite X-601 Safety And Instructions For Use preview
X-601
Brand: X-lite Pages: 33
hepco & becker 5054560 00 01 Quick Start Manual preview
5054560 00 01
Brand: hepco & becker Pages: 4
hepco & becker 630338 00 02 Mounting Instructions preview
630338 00 02
Brand: hepco & becker Pages: 4
DYNATEK D3K7-4 Installation Instructions preview
D3K7-4
Brand: DYNATEK Pages: 4
Shark RSF 2 RACE Manual preview
RSF 2 RACE
Brand: Shark Pages: 8
Aim My-Chron 2 User Manual preview
My-Chron 2
Brand: Aim Pages: 5
Yamaha 2010 YZF-R6 Manual Instruction preview
2010 YZF-R6
Brand: Yamaha Pages: 81
Yamaha 2011 Star XV250A Owner'S Manual preview
2011 Star XV250A
Brand: Yamaha Pages: 90
Yamaha 2011 V Star XVS650A Owner'S Manual preview
2011 V Star XVS650A
Brand: Yamaha Pages: 94
Yamaha 2011 WR250X Owner'S Manual preview
2011 WR250X
Brand: Yamaha Pages: 102
Yamaha 2011 WR250RA Owner'S Manual preview
2011 WR250RA
Brand: Yamaha Pages: 102
Yamaha 2010 XV250Z Owner'S Manual preview
2010 XV250Z
Brand: Yamaha Pages: 88
Yamaha 2011 MT-01 Owner'S Manual preview
2011 MT-01
Brand: Yamaha Pages: 96
Yamaha 2010 V Star XVS650AZ Owner'S Manual preview
2010 V Star XVS650AZ
Brand: Yamaha Pages: 92
Yamaha 2010 XVS1100AZ Owner'S Manual preview
2010 XVS1100AZ
Brand: Yamaha Pages: 96

Brands by name

Popular brands

Load more brands