10
TUNING THE CHASSIS
33
Guideline
Rebound damping (SX
‑
F USA)
Comfort
17 clicks
Standard
15 clicks
Sport
13 clicks
Rebound damping (XC
‑
F)
Comfort
17 clicks
Standard
15 clicks
Sport
13 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
10.14
Handlebar position
800116-10
On the upper triple clamp, there are two holes at a distance of
to each other.
Hole distance A
15 mm (0.59 in)
The holes on the handlebar support are placed at a distance of
from the center.
Hole distance B
3.5 mm (0.138 in)
The handlebar can be mounted in four different positions. In this way, the handlebar
can be mounted in the position that is most comfortable for the rider.
10.15
Adjusting the handlebar position
x
B00375-10
–
Remove screws
. Take off the handlebar clamps. Take off the handlebar and lay
it to one side.
Info
Protect the components against damage by covering them.
Do not bend the cables and lines.
–
Remove screws
. Remove the handlebar supports.
–
Place the handlebar supports in the required position. Mount and tighten
screws
.
Guideline
Screw, handlebar support
M10
40 Nm
(29.5 lbf ft)
Loctite
®
243™
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount and tighten screws
evenly.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)
