KTM 2015 200 Duke, Owner'S Manual

Page: 58 / 177

7 PREPARING FOR USE
56
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the controls.
–
Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible to get
a better feel for the vehicle.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in. ( p. 56)
7.2 Running in the engine
–
During the running-in phase, do not exceed the specified engine speed.
Guideline
Maximum engine speed
During the first: 1,000 km (620 mi) 7,500 rpm
Tip
During the running-in phase, set the shift warning light to the specified engine speed.
–
Adjust the shift speed RPM 1 . ( p. 47)
–
Adjust the shift speed RPM 2 . ( p. 47)
–
Avoid fully opening the throttle!