11
SERVICE WORK ON THE CHASSIS
57
601361-10
–
Fill bleeding syringe
4
with the appropriate fluid.
Bleed syringe (50329050000)
Hydraulic fluid (15) (
–
On the slave cylinder, remove bleeder screw
5
and mount bleeding syringe
4
.
400247-10
–
Inject the fluid into the system until it escapes from hole
6
of the master cylinder
without bubbles.
–
To prevent overflow, drain the fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of container
4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.
11.36
Removing the trim
601352-10
–
Detach the plug-in connectors on the turn signal cables.
–
Open quick releases
1
.
–
Remove the trim toward the front.
11.37
Mounting the trim
601353-10
–
Attach the trim to guides
1
.
Info
When positioning the trim, exercise caution with counterpieces
2
of the
quick releases to ensure that you do not damage the trim.
