KTM 2013 450 Rally Factory Replica Owner'S Manual Download Page 24

Page: 24 / 126

CONTROLS

6.16

Foot brake lever

601309-10

Foot brake lever

is located in front of the right footrest.

The rear brake is engaged with the foot brake lever.

6.17

Side stand

601699-10

The side stand

is on the left side of the vehicle.

601700-10

The side stand is used to park the motorcycle.

Info

When you are riding, the side stand

must be folded up and secured with the

rubber band

6.18

Steering lock

601300-10

The steering lock

is fitted on the left of the steering head.

The steering lock is used to lock the steering. Steering, and therefore riding, is no
longer possible.

6.19

Locking the steering

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

Summary of Contents for 2013 450 Rally Factory Replica































































































































Search results

Summary of Contents for 2013 450 Rally Factory Replica

Reviews:

Related manuals for 2013 450 Rally Factory Replica

Brands by name

Popular brands

KTM 2013 450 Rally Factory Replica, Owner'S Manual

Search results

Summary of Contents for 2013 450 Rally Factory Replica

Reviews:

Related manuals for 2013 450 Rally Factory Replica

Brands by name

Popular brands