KTM 2012 350 EXC-F SIX DAYS, Owner'S Manual

Page: 46 / 117

SERVICE WORK ON THE CHASSIS
44
10.8
Installing the fork legs
x
101325-10
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws

toward the front.
101323-11
(XCF
‑
W, EXC
‑
F EU, EXC
‑
F AUS)
–
Tighten screws

.
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)
101324-11
(EXC-F SIX DAYS)
–
Tighten screws

.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 12 Nm
(8.9 lbf ft)
101326-10
–
Position brake caliper, and mount and tighten screws

.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Mount cable binder

.
–
Refit the headlight mask with the headlight. ( p. 82)
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws

.
–
Install the front wheel.
x
( p. 74)
10.9
Removing the fork protector
x
–
Remove the fork legs. ( p. 43)
101327-10
–
Remove screws

on the left fork leg. Remove the fork protector upwards.
–
Remove the screws on the right fork leg. Remove the fork protector upwards.