CONTROLS
13
5.11
Electric starter button (XCF
‑
W, EXC
‑
F EU, EXC-F SIX DAYS)
101301-10
The electric starter button
is fitted on the right side of the handlebar.
Possible states
• Electric starter button
in basic position
• Electric starter button
pressed
–
In this position, the electric starter is actuated.
5.12
Map
‑
Select switch for the basic setting (EXC-F SIX DAYS)
101474-10
The
Map
‑
Select
switch for the basic setting
is fitted under the seat.
Possible states
1
Soft
–
The mapping with reduced peak performance for better rideabil-
ity is activated.
2
ADVANCED
–
The mapping for performance with a very direct response
is activated.
3
-
9
,
0
Standard
–
The mapping for performance with a balanced response is
activated.
The
Map
‑
Select
switch for the basic setting is used to make a preselection of the
engine characteristics.
5.13
Map
‑
Select switch for vehicle operation (EXC-F SIX DAYS)
101431-10
The
Map
‑
Select
switch for vehicle operation
is fitted on the right side of the handle-
bar.
Possible states
Standard
–
STANDARD Mapping is always activated in this setting.
SOFT or ADVANCED
–
The mapping that is set on
the
Map
‑
Select
switch for the basic setting is activated in this setting.
The
Map
‑
Select
switch for vehicle operation is used to change the engine characteris-
tics on the handlebar. This change is activated when the engine is idling or after the
motorcycle is restarted.
5.14
Light switch (XCF
‑
W)
101303-10
The light switch
is on the right of the speedometer.
Possible states
• Light off
–
Light switch is pressed in up to the stop. In this position, the light is
switched off.
• Light on
–
Light switch is pulled out to the stop. In this position, the low beam
and tail light are switched on.
5.15
Overview of indicator lamps (XCF
‑
W)
101302-01
Possible states
FI
warning lamp (
MIL
) lights up/flashes orange
–
The OBD has detected
an emission- or safety-critical fault.
The fuel level warning lamp lights up orange
–
The fuel level has
reached the reserve mark.
