MAINTENANCE WORK ON CHASSIS AND ENGINE
38
8.24
Fork offset
0
0
A
A
400566-10
The fork offset
has an impact on the handling of the vehicle. It is calculated from
the center of the fork leg to the center of the steering head bearing.
The fork offset can optionally be adjusted.
600111-10
When mark
1
is visible in drill hole
(as delivered), you will achieve better handling in
bends.
Fork offset
Mark
1
visible
20 mm (0.79 in)
If mark
1
is not visible in drill hole
, you will achieve better riding stability on fast
stretches.
Fork offset
No mark
22 mm (0.87 in)
8.25
Handlebar position
0
0
B
B
0
0
A
A
400361-10
On the upper triple clamp, there are 2 holes at a distance of
to each other.
Distance
between holes
15 mm (0.59 in)
The holes on the handlebar support are placed at a distance of
from the center.
Distance
between holes
3.5 mm (0.138 in)
The handlebar can be mounted in 4 different positions. This enables you to mount the
handlebar in the position most suitable for the rider.
The handlebar supports can also be mounted at 2 different heights (with and without
spacer).
Thick spacer
9 mm (0.35 in)
Summary of Contents for 2009 690 Rally Factory Replica
Page 1: ...OWNER S MANUAL 2009 690 Rally Factory Replica ART NO 3211361en...
Page 2: ......
Page 87: ...85...
Page 91: ...WIRING DIAGRAM 89...
