KTM 2009 690 Rally Factory Replica, Owner'S Manual

Page: 39 / 104

MAINTENANCE WORK ON CHASSIS AND ENGINE
37
8.23
Adjusting play of steering head bearing
x
600099-11
–
Remove screws

. Remove the holding plate with handlebar clamps.
–
Remove screws

. Remove the steering damper

.
–
Remove the trim. ( p. 54)
600100-10
–
Fix the handlebar

onto the instrument support with cable ties

.
–
Loosen screws

and

.
600100-11
–
Loosen the nut

and screw

.
–
Retighten the scew

.
Guideline
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
–
Lock the screw

and nut

.
Guideline
Lock nut, top steering head M20x1.5 25 Nm
(18.4 lbf ft)
600100-12
–
Tighten screw

.
Guideline
Screw, top steering stem M8 20 Nm
(14.8 lbf ft)
–
Fully tighten screw

.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
600099-11
–
Position the steering damper

. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Open the cable binders and position the handlebar.
–
Position the holding plate with handlebar clamps. Mount and tighten screws

.
Guideline
Screw, handlebar clamp M8 16 Nm
(11.8 lbf ft)
–
Mount the trim. ( p. 55)