COMBINATION INSTRUMENT 7
43
–
If the device is in the range of the combination instrument and
has not been deleted previously while the
Bluetooth
®
function
is active:
The device is automatically paired with the combination
instrument.
If the device is not automatically paired with the combina-
tion instrument after approx. 30 seconds:
–
Restart combination instrument or
Pairing
repeat pro-
cedure.
–
To delete a paired device, press the
UP
or button
DOWN
until
the paired device is highlighted.
–
Open the
delete Pairing
menu by pressing the
RIGHT
button
and confirm with the
SET
button.
7.28.7
Telephony (optional)
S03796-01
Condition
• Function
KTM MY RIDE
(optional) activated.
• Function
Bluetooth
®
(optional) activated.
• The combination instrument is connected to a suitable cell-
phone.
• The combination instrument is connected to a suitable head-
set.
Warning
Danger of accidents
Headphone volume which is too
high distracts attention from traffic activity.
–
Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.
–
Press the
RIGHT
button to accept an incoming call.
–
Press the
LEFT
button to reject an incoming call.
–
Press and hold the
UP
button in order to increase the volume.
–
Press and hold the
DOWN
button in order to reduce the vol-
ume.
–
Press the
BACK
button briefly to reduce the telephony display.
Info
The call duration and contact are displayed. Depend-
ing on the cellphone settings, the contact is shown by
name.
When the telephony display is activated and reduced in
size, a small window is displayed at the top edge of the
combination instrument display.
An incoming call is visualized in a small window at the
top of the combination instrument display when the
navigation function is active.
