LIST OF SYMBOLS 30
181
30.1
Red symbols
Red symbols indicate an error condition that requires immediate intervention.
The oil pressure warning lamp lights up red
–
The oil pressure is too low. Stop immediately,
taking care not to endanger yourself or other road users in the process, and switch off the
engine.
30.2
Yellow and orange symbols
Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are
also represented by yellow or orange symbols.
RACE-ON indicator lamp lights up/flashes yellow/red
–
Status or error messages relating to
Race-on system/alarm system.
The general warning lamp lights up yellow
–
A note/warning note on operating safety has been
detected. This is also shown in the display.
The ABS warning lamp lights up yellow
–
Status or error messages relating to ABS. When ABS
Supermoto
mode is activated, SM is shown in the display.
TC indicator lamp lights up/flashes yellow
–
The
MTC
p. 146) is not active, is currently
intervening or a Launch Control Start is being executed. The TC indicator lamp also lights up
if a malfunction is detected. Contact an authorized KTM workshop. The TC indicator lamp
flashes if the motorcycle traction control actively engages.
The cruise control system indicator lamp lights up yellow
–
The cruise control system function
is switched on, but cruise control is not activated.
Malfunction indicator lamp lights up yellow
–
The OBD has detected a malfunction in the
vehicle electronics.
30.3
Green and blue symbols
Green and blue symbols reflect information.
The left turn signal indicator lamp flashes green with a steady rhythm
–
The left turn signal is
switched on.
The high beam indicator lamp lights up blue
–
The high beam is switched on.
The cruise control system indicator lamp lights up green
–
The cruise control system function
is switched on and cruise control is activated.
The right turn signal indicator lamp flashes green with a steady rhythmic flash
–
The right turn
signal is switched on.
