KTM 1290 Super Duke R 2017, Owner'S Manual, Page: 211 / 247

22 TROUBLESHOOTING
209
Faults Possible cause Action
The combination instrument shows
nothing on the display Fuse 1 is blown
–
Change the fuses in the fuse box. ( p. 181)
The main fuse is blown
–
Change the main fuse. ( p. 178)
The battery is discharged
–
Recharge the battery. ( p. 173)
–
Check the open-circuit current.
The engine does not turn if the emer-
gency OFF switch/electric starter but-
ton is pressed into the lower position Operating error
–
Carry out the start procedure. ( p. 92)
The battery is discharged
–
Recharge the battery. ( p. 173)
–
Check the open-circuit current.
The safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
Electronic fault
–
Read out the fault memory using the KTM diag-
nostics tool.
The engine only turns if the clutch
lever is drawn The vehicle is in gear
–
Shift the transmission to idle .
The safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
The engine turns although a gear is
engaged The safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
The engine turns but does not start The coupling of the fuel hose connec-
tion is not connected
–
Reconnect the coupling of the fuel hose connec-
tion.
Defect in the fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.
The fuel quality is insufficient
–
Add suitable fuel.
The engine dies during the trip Lack of fuel
–
Refuel. ( p. 106)
Defect in the fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.
Malfunction indicator lamp lights up or
flashes Defect in the fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.