KTM 1290 Super Duke R 2017, Owner'S Manual, Page: 149 / 247

14 BRAKE SYSTEM
147
MSC
The MSC is a supplementary function for the ABS that can prevent blocking and slipping of
the wheels during braking when the vehicle is inclined (riding in curves) within the physical
limitations.
By means of the 5D sensor, ABS control is now dependent on the inclination and pitch
angle.
Info
The MSC is only active in ROAD ABS mode.
14.2 Checking the brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized KTM workshop will be glad to help.)
100135-10
–
Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness
A .
Info
Wear will reduce the thickness of the brake disc at contact surface
1
of the
brake linings.
Brake discs - wear limit
front 4.5 mm (0.177 in)
rear 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value:
–
Change the front brake discs.