KTM 1290 Super Adventure, Owner'S Manual

Page: 66 / 262

7 COMBINATION INSTRUMENT
64
7.9.9 "Heating"
402434-01
–
Press UP or DOWN button till the "Heating" menu appears on the matrix display. Pressing
the SET button opens the menu.
–
Use the UP or DOWN button to navigate through the menu. Select a heating level for the
heated grip or rider seat heating with the SET button.
Info
The status of the passengers seat heating is displayed with
Seat Pil
.
The passenger's seat heating can only be switched on of off by the switch next to
the grab handle.
7.9.10 "MTC/ABS"
L01436-10
Condition
• The vehicle is stationary.
–
Press the UP or DOWN button until the "MTC" / "ABS" menu appears on the matrix display.
In the "MTC/ABS" menu, "MTC" and "ABS" can be switched off.
In "ABS mode" , a choice can be made between "Road" and "Offroad" .
Info
After the ignition is switched on, motorcycle traction control and ABS are enabled
again.
When the
"Offroad" ABS mode is enabled, ABS only controls the front wheel. The
rear wheel is not controlled by ABS and may block during braking maneuvers.
When the
"Road" ABS mode is enabled, the brakes are also applied to the rear wheel
when the front brake is activated. ABS can intervene on both wheels.