KTM 1290 Super Adventure, Owner'S Manual, Page: 159 / 262

14 BRAKE SYSTEM
157
during hard braking in curves. This prevents the motorcycle from righting itself from an
inclined angle and moving along a larger curve radius. Due to the additional electronic con-
trol of the brake force distribution between the two wheels, the braking force is optimally
distributed and the motorcycle is additionally stabilized.
Info
The MSC is only active in ABS mode "Road" .
14.2 Checking the brake discs
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)
400618-10
–
Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness

.
Info
Wear will reduce the thickness of the brake disc at the contact surface

of
the brake linings.
Brake discs - wear limit
Front 4 mm (0.16 in)
Rear 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value.
–
Change the front brake discs.
–
Change the rear brake discs.