KTM 1290 SUPER ADVENTURE R 2017, Owner'S Manual, Page: 30 / 274

6 CONTROLS
28
6.5 Light switch
K00799-10
The light switch 1 is fitted on the combination switch on the left.
Possible states
Low beam on
–
Light switch in position
A
. In this position, the low beam
and tail light are switched on.
High beam on
–
Push the light switch to position B . In this position, the
high beam and the tail light are switched on.
Headlight flasher.
–
Push the light switch into position
C
.
6.6 Cruise control system tip switch
K00800-10
The cruise control system tip switch
1
is fitted on the left side of the combination switch.
Possible states
• Cruise control system tip switch in the basic position.
• Cruise control system tip switch pressed to the left.
–
In this position, the cruise
control system function is switched on and off. The operating mode is displayed in the
combination instrument.
• Briefly press cruise control system tip switch at the top.
–
The last saved speed is
reached and maintained. Every subsequent brief pressing increases the target speed
by 1 km/h or 1 mph.
• Press and hold cruise control system tip switch at the top.
–
The target speed
increases in increments of 5 km/h or 5 mph.
• Briefly press cruise control system tip switch at the bottom.
–
The cruise control
system function is activated and the current speed is maintained. Every subsequent
brief press reduces the target speed by 1 km/h or 1 mph.
• Press and hold cruise control system tip switch at the bottom.
–
The target speed
decreases in increments of 5 km/h or 5 mph.