KTM 1290 SUPER ADVENTURE R 2017, Owner'S Manual

Page: 238 / 274

22 TROUBLESHOOTING
236
Faults Possible cause Action
The combination instrument shows
nothing on the display Fuse 1 blown
–
Change the fuses in the fuse box. ( p. 210)
Main fuse burned out
–
Change the main fuse. ( p. 208)
The battery is discharged
–
Recharge the battery. ( p. 203)
–
Check the quiescent current.
The engine does not turn if the emer-
gency OFF switch/electric starter but-
ton is pressed into the lower position Operating error
–
Carry out the start procedure. ( p. 110)
The battery is discharged
–
Recharge the battery. ( p. 203)
–
Check the quiescent current.
Safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
Electronic fault
–
Read out the fault memory using the KTM diag-
nostics tool.
Engine turns only if the clutch lever is
drawn The vehicle is in gear
–
Shift the transmission to idle .
Safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
Engine turns although a gear is
engaged Safety start system is faulty
–
Read out the fault memory using the KTM diag-
nostics tool.
Engine turns but does not start The plug-in connection of the fuel hose
connection is not connected
–
Connect the plug-in connection of the fuel line.
Fault in fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.
Fuel quality is insufficient
–
Add suitable fuel.
Engine dies during the trip Lack of fuel
–
Refuel. ( p. 123)
Fault in fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.
Malfunction indicator lamp lights up or
flashes Fault in fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.