KTM 125 SX EU 2015, Owner'S Manual

Page: 49 / 129

11 SERVICE WORK ON THE CHASSIS
47
11.18 Removing the shock absorber
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 39)
–
Remove the main silencer. ( p. 51)
B02098-10
Main work
–
Remove screw

.
–
Remove screw cap

.
B02099-10
–
Press angle lever

toward the rear.
–
Press linkage lever  downward.
B02100-10
–
Remove screw

.
–
Remove the shock absorber from the top.
11.19 Installing the shock absorber
x
B02100-11
Main work
–
Insert the shock absorber from above.
–
Position the shock absorber.
–
Mount and tighten screw

.
Guideline
Screw, top shock absorber M10 60 Nm
(44.3 lbf ft) Loctite ® 2701™
B02098-11
–
Position the angle lever and linkage lever.
–
Mount and tighten screw cap  .
Guideline
Nut, linkage lever to angle lever M14x1.5 80 Nm (59 lbf ft)
–
Mount and tighten screw

.
Guideline
Screw, bottom shock
absorber M10 60 Nm
(44.3 lbf ft) Loctite ® 2701™
Finishing work
–
Install the main silencer. ( p. 51)
–
Remove the motorcycle from the lift stand. ( p. 39)