KTM 125 SX EU 2015 Page 14 Owner'S Manual Download

Page: 14 / 129

CONTROLS

6.1

Clutch lever

101655-10

(125/150 SX)

The clutch lever



is fitted on the left side of the handlebar.

The clutch is hydraulically operated and self-adjusting.

L01224-11

(All 250/300 models)

The clutch lever



is fitted on the left side of the handlebar.

The clutch is hydraulically operated and self-adjusting.

6.2

Hand brake lever

L00932-10

Hand brake lever



is located on the right side of the handlebar.

The hand brake lever is used to activate the front brake.

6.3

Throttle grip

L00932-11

Throttle grip



is fitted on the right side of the handlebar.

6.4

Kill switch

101659-10

The kill switch



is fitted on the left side of the handlebar.

Possible states

• Kill switch

in basic position

–

In this position, the ignition circuit is closed, and

the engine can be started.

• Kill switch

pressed

–

In this position, the ignition circuit is interrupted, a run-

ning engine stops, and a non-running engine will not start.

Summary of Contents for 125 SX EU 2015


































































































































Search results

Summary of Contents for 125 SX EU 2015

Reviews:

Related manuals for 125 SX EU 2015

Brands by name

Popular brands

KTM 125 SX EU 2015, Owner'S Manual

Search results

Summary of Contents for 125 SX EU 2015

Reviews:

Related manuals for 125 SX EU 2015

Brands by name

Popular brands