SERVICE WORK ON THE CHASSIS
64
601456-10
–
Check the chain sliding guard for wear at the opening.
» If the rivets
of the chain are no longer visible at the lower edge
of the
opening of the chain sliding guard:
–
Change the chain sliding guard.
x
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding guard
M5
5 Nm
(3.7 lbf ft)
10.26
Adjusting basic position of clutch lever
101224-10
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
.
Info
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between
the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
10.27
Checking fluid level of hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
601446-01
–
Check the fluid level.
The fluid level must be between the
MIN
and
MAX
markings.
» If the coolant level does not meet specifications:
–
Correct the fluid level of the hydraulic clutch. (
Summary of Contents for 1190 RC8 R Track
Page 1: ...OWNER S MANUAL 2011 1190 RC8 R TRACK Art no 3211609en...
Page 2: ......
Page 107: ...105...
