TUNING THE CHASSIS
48
601421-10
–
Tighten screw
.
Guideline
Screw, top triple clamp
M8
17 Nm
(12.5 lbf ft)
–
Tighten screws
.
Guideline
Screw, bottom triple clamp
M8
15 Nm
(11.1 lbf ft)
–
Tighten screw
.
Guideline
Screw, handlebar stub
M8
20 Nm
(14.8 lbf ft)
–
Repeat the adjustment on the other fork leg.
Info
The vehicle level setting on both fork legs must be identical.
9.13
Adjusting the vehicle level at the rear
Warning
Danger of accidents
Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
601425-10
–
Loosen screw
but do not remove it.
601426-10
–
Turn eccentric shaft
to the desired position using the tool from the tool set.
Guideline
Standard
LOW
Maximum adjustment range between
HIGH
-
LOW
180°
Open end wrench SW 38 (69012021000)
Info
The chassis height can be adjusted in both directions.
601427-10
–
Tighten screw
.
Guideline
Screw, clamp, eccentric shaft of
deflector
M8
18 Nm
(13.3 lbf ft)
Summary of Contents for 1190 RC8 R Track
Page 1: ...OWNER S MANUAL 2011 1190 RC8 R TRACK Art no 3211609en...
Page 2: ......
Page 107: ...105...
