
CONTROLS
29
5.16
Indicator lamps
400580-14
Possible states
The turn signal indicator lamp flashes green simultaneously with the turn
signal
–
The turn signal is switched on.
The oil indicator lamp lights up red
–
The oil pressure is too low.
The shift warning lights up/flashes red
–
The set shift speed has been
reached.
The idle speed indicator lamp lights up green
–
The transmission is shifted
to idle.
The high beam indicator lamp lights up blue
–
The high beam is switched
on.
EFI
warning lamp (
MIL
) lights up / flashes red
–
The OBD has detected an
emission- or safety-critical fault.
The general warning lights up yellow
–
An operating safety (warning) mes-
sage was detected. This is also shown periodically in the info display.
The immobilizer indicator lamp lights up or flashes red
–
Status or error
message for immobilizer/alarm system.
Summary of Contents for 1190 RC8 AUS
