KTM 1190 RC8 AUS, Owner'S Manual, Page: 186 / 250

MAINTENANCE WORK ON FRAME AND ENGINE
184
9.72
Adjusting the play in the throttle cable
x
100754-10
–
Move the handlebar to the straight-ahead position.
–
Throttle position sensor circuit A - check in zero position. x
Info
It is imperative to use the KTM diagnostics tool for this.
–
Push back protective cover

.
–
Loosen lock nut

.
–
Set the play in the throttle cable by turning adjusting screw

.
Guideline
Throttle cable play 3… 5 mm (0.12… 0.2 in)
–
Tighten lock nut

.
–
Mount the protection cap.
9.73
Handlebar height/position
100755-10
Handlebar height
By removing or inserting distance sleeves

, you can set the handlebar height at two differ-
ent positions.
Length of distance sleeve

20 mm (0.79 in)
With distance sleeves, the handlebar stub is positioned low for sports use. Removing the
distance sleeves gives a more upright sitting position.
Standard Low position with distance sleeve