KTM 1190 RC8 AUS, Owner'S Manual, Page: 175 / 250

MAINTENANCE WORK ON FRAME AND ENGINE
173
100745-12
–
Position the cover.
Info
Check for correct positioning and freedom of movement of the brake lines.
–
Mount and tighten screws

.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
9.62
Checking the headlight setting
0 0 B B
0 0 A A
400420-10
–
Stand the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance

under the first mark.
Guideline
Distance

5 cm (2 in)
–
Position the vehicle vertically at a distance

in front of the wall and switch on the low
beam.
Guideline
Distance

5 m (16 ft)
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.