KTM 1190 RC8 AUS, Owner'S Manual, Page: 106 / 250

MAINTENANCE WORK ON FRAME AND ENGINE
104
100683-10
–
Turn adjusting screws

clockwise to the stop.
Info
The adjusting screws are located at the top end of the fork legs.
Adjust both fork legs to the same setting.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
Comfort 15 clicks
Standard 10 clicks
Sport 5 clicks
Full payload 5 clicks
Info
Turn clockwise to increase suspension damping; turn counterclockwise to reduce
damping.
9.8
Adjusting the spring preload of the fork
Info
Spring preload determines the initial fork position.
The spring preload setting is optimal when it is set for the weight of the rider and that of any baggage and a passenger, and thus
ensures a compromise between maneuverability and stability.