KTM 1190 ADVENTURE R Page 143 Owner'S Manual Download

Page: 143 / 229

WHEELS, TIRES

141

15.1

Removing the front wheel

Preparatory work

–

Raise the vehicle with the center stand. (

p. 105)

S00313-10

Main work

–

Place a load on the rear of the vehicle.

The front wheel is not in contact with the ground.

–

Remove screw

and pull wheel speed sensor

out of the hole.

S00314-10

–

Remove screws

from both brake calipers.

–

Press back the brake linings with a light lateral tilting of the brake calipers on the brake
disc. Pull the brake calipers carefully back from the brake discs and hang them to one
side.

Info

Do not pull the hand brake lever when the brake caliper has been removed.

Summary of Contents for 1190 ADVENTURE R






































































































































































































































Search results

Summary of Contents for 1190 ADVENTURE R

Reviews:

Related manuals for 1190 ADVENTURE R

Brands by name

Popular brands

KTM 1190 ADVENTURE R, Owner'S Manual

Search results

Summary of Contents for 1190 ADVENTURE R

Reviews:

Related manuals for 1190 ADVENTURE R

Brands by name

Popular brands