KTI Networks KGS-1064-HP, User Manual

Page: 52 / 240

-52-
2.5.2 Network
2.5.2.1 Limit Control
Limit Control allows for limiting the number of users on a given port. A user is identified by a MAC address
and VLAN ID . If Limit Control is enabled on a port, the limit specifies the maximum number of users on the
port. If this number is exceeded, an action is taken. The action can be one of the four different actions as
described below. The Limit Control module utilizes a lower-layer module, Port Security module, which
manages MAC addresses learned on the port. The Limit Control configuration consists of two sections, a
system- and a port-wide.