KTI Networks KGS-1064-HP, User Manual

Page: 161 / 240

-161-
3.3.4 QCL Status
Status Description
User Indicates the QCL user.
QCE# Indicates the index of QCE.
Frame Type Indicates the type of frame to look for incoming frames. Possible frame types are:
Any : The QCE will match all frame type.
Ethernet : Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC : Only ( LLC ) frames are allowed.
SNAP : Only ( SNAP ) frames are allowed.
IPv4 : The QCE will match only IPV4 frames.
IPv6 : The QCE will match only IPV6 frames.
Port Indicates the list of ports configured with the QCE.
Action Indicates the classification action taken on ingress frame if parameters configured are
matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class : Classified QoS class; if a frame matches the QCE it will be put in the queue.
DPL : Drop Precedence Level ; if a frame matches the QCE then DP level will set to
value displayed under DPL column.
DSCP : If a frame matches the QCE then DSCP will be classified with the value
displayed under DSCP column.
Conflict Displays Conflict status of QCL entries. As H/W resources are shared by multiple
applications. It may happen that resources required to add a QCE may not be
available, in that case it shows conflict status as 'Yes', otherwise it is always 'No'.
Please note that conflict can be resolved by releasing the H/W resources required to
add QCL entry on pressing 'Resolve Conflict' button.
Click to release the resources required to add QCL entry, in case the conflict status
for any QCL entry is 'yes'.