background image

M172-HDB230-001

HD CCTV

Digital Video Camera

OPERATION MANUAL

Thank you for choosing our high quality camera.

Before attempting to connect or operate, please read and follow 

these instructions.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,  

    including interference that may cause undesired operation.

Any changes or modifications in construction of this devies which are not 

expressly approved by the party responsible for compliance could void the 

user's authority to operate the equipment.

Caution -

 CAUTION 

1. A regulated DC12V 300mA power supply is recommended for use with this 

camera for the best picture and the most stable operation. 

An unregulated power supply can cause damage to the camera.

When an unregulated power supply is applied, the product warranty will be 

roid.

2. It is recommended that the camera be used with a monitor that has a CCTV 

quality 75Ω video impedance level. If your monitor is switched to high impedance 

then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal 

componets. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reflective light, which 

may cause smear on the picture and possible damage to the image sensor.

5. Do not remove the serial sticker for the warranty service.

6. Do not expose the camera to rain or other types of liquid.

7. The apparatus must be connected to a main socket-outlet with a protective

earth connection.

This equipment has been tested and found to comply with the limits for a 

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference when 

the equipment is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed 

and used in accordance with the instruction manual, may cause harmful 

interference to radio communications. Operation of this equipment in a 

residential area is likely to cause harmful interference in which case the user 

will be required to correct the interference at his own expense.

Note -

This is a class A product. In a domestic environment this product may cause 

radio interference in which case the user may be required to take adequate 

measures.

WARNING -

CAUTIONS

CAUTIONS

WEEE

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that 

it should not be disposed with other household wastes at the end 

of its working life. To prevent possible harm to the environment or 

human health from uncontrolled waste disposal, please separate 

this from other types of wastes and recycle it responsibly

to promote the sustainable reuse of material resources. 

Household users should contact either the retailer where they 

purchased this product, or their local government office, for details 

of where and how they can take item for environmentally safe 

recycling.

Business users should contact their supplier and check the terms 

and conditions of the purchase contract.

This product should not be mixed with other commercial wastes 

for disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 

NOT REMOVE COVER(OR BACK). NO USER  SERVICING TO 
QUALIFED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence 

of uninsulated "dangerous voltage" within the product's 

enclosure that may be of sufficient mangnitude to constitute 

a risk of electric shock.
This symbol is intended to alert the user to the presence of 

important operating and maintenance(servicing) instruction in 

the literature accompanying the appliance.

COMPONENTS

INSTALLATION

HD CCTV Camera

Mounting Bracket

Screw - 3ea 

Operation Manual

Option - Remote Control (OSD Key)

Mount Position

Monitor Connection

When you install the camera, please glue up the end of 

cable to keep it stable in order to protect the camera from 

the humidity problems.

DIMENSIONS

Unit(mm)

50

1/4"-20UNC

40

28.6

24.8

3-Ф

3.2

16.8

77.5

68.6

61.5

4

4

4

Ф

23

Ф

23

Ф

17

Ф

23

HD SDI IN

Monitor

BNC Female

(HD-SDI Jack)

DC12V IN (Black)

BNC Female (2'nd Video)

Camera

DC12V Power Supply

5Key Remote Control

(Option)

RCA Jack

(OSD Key Jack)

1M or 35M(Maximum working distance.)

* Remote Control - Circuit Diagram (Option)

Function

SW1: Menu OSD Menu on / off, Selection.

SW2: Up OSD Menu up.

SW3: Down OSD Menu Down.

SW4: Left OSD Menu Left.

SW5: Right OSD Menu Right.

Board Lens

(Only IP67)

Board Lens

Pinhole Lens

Reviews: