8.1.1 Display
The six-row display contains the following information:
Fig. 9: Display for the selected menu option
Display element
Description
Parameter No.
Displays the selected parameter No.
Model
or
Selected pump
A - HMI - C
A = Advanced or B = Basic
HMI With control panel
C Customer access level
Pump 1, Pump 2 ... Pump 6
Main menu selection
Operation
Diagnosis
Settings
Information
Parameter selection list
List of selectable parameters
Operating mode
Man, Off, Auto
Operating status
Run, Stop, Sleep
The number of the current menu or parameter is always displayed at the top left of
the screen. This four-digit number indicates the path through the menu levels and
thus enables the user to quickly locate parameters. (
The PumpDrive model or selected pump is displayed at the top right of the screen.
The current operating mode of the PumpDrive currently selected is displayed at the
bottom left of the screen: Man/Auto/Off.
The current operating status of the PumpDrive selected is displayed at the bottom
right of the screen.
If a fault or malfunction occurs, this is displayed in the bottom line instead of the
operating mode and status.
8.1.2 LED display
The LED "traffic light" signals provide information about the pump system's
operating status:
Table 11: Control unit: LEDs
LED
Description
Red: One or several alerts are active
Yellow: One or several warnings are active
Green: Trouble-free operation
8.1.3 Function keys
For direct access to the elements of the first menu level:
8 Operating the Pressure Booster System
30 of 56
Hya®-Solo DV
