![KSB Hya-Solo DV Series Installation & Operating Manual Download Page 12](http://html1.mh-extra.com/html/ksb/hya-solo-dv-series/hya-solo-dv-series_installation-and-operating-manual_2006480012.webp)
CAUTION
Damage during storage by frost, moisture, dirt, UV radiation or vermin
Corrosion/contamination of pressure boosting system!
▷
Store the pressure booster system in a frost-proof room. Do not store the unit
outdoors.
CAUTION
Wet, contaminated or damaged openings and connections
Leakage or damage of the pressure booster system!
▷
Only open the openings of the pressure booster system at the time of
installation.
Store the pressure booster system in a dry, protected room where the atmospheric
humidity is as constant as possible.
4.4
Return to supplier
1. Drain the pressure booster system as per operating instructions.
2. Always flush and clean the pressure booster system, particularly if it has been
used for handling noxious, explosive, hot or other hazardous fluids.
3. If the fluids handled by the system leave residues which might lead to corrosion
when coming into contact with atmospheric humidity, or which might ignite
when coming into contact with oxygen, the pressure booster system must also be
neutralised and blown through with anhydrous inert gas for drying purposes.
4. Always complete and enclose a certificate of decontamination when returning
the pressure booster system.
It is imperative to indicate any safety and decontamination measures taken.
NOTE
If required, a blank certificate of decontamination can be downloaded from the KSB web
www.ksb.com/certificate_of_decontamination
4.5
Disposal of pressure booster system
WARNING
Fluids posing a health hazard
Hazardous to persons and the environment!
▷
Collect and properly dispose of flushing liquid and any fluid residues.
▷
Wear safety clothing and a protective mask, if required.
▷
Observe all legal regulations on the disposal of fluids posing a health hazard.
1. Dismantle the pressure booster system.
Collect greases and other lubricants during dismantling.
2. Separate and sort the pump materials, e.g. by:
- Metals
- Plastics
- Electronic waste
- Greases and other lubricants
3. Dispose of materials in accordance with local regulations or in another controlled
manner.
4 Transport/Temporary Storage/Disposal
12 of 56
Hya®-Solo DV