background image

3 Transport/Temporary Storage/Disposal

13 of 44

Hya-Duo D FL

3.5 Disposal

 WARNING

Fluids handled, consumables and supplies which are hot and/or pose a health
hazard

Hazard to persons and the environment!

Collect and properly dispose of flushing fluid and any fluid residues.

Wear safety clothing and a protective mask if required.

Observe all legal regulations on the disposal of fluids posing a health hazard.

1. Dismantle the fire-fighting system.

Collect greases and other lubricants during dismantling.

2. Separate and sort the pump materials, e.g. by:

- Metals
- Plastics
- Electronic waste
- Greases and other lubricants

3. Dispose of materials in accordance with local regulations or in another

controlled manner.

Electrical or electronic equipment marked with the adjacent symbol must not be
disposed of in household waste at the end of its service life.

Contact your local waste disposal partner for returns.

If the used electrical or electronic equipment contains personal data, the operator is
responsible for deleting it before the equipment is returned.

Summary of Contents for Hya-Duo D FL Series













































Reviews: