background image

11 EU Declaration of Conformity

44 of 48

Hya-Duo D FL Compact

11 EU Declaration of Conformity

Manufacturer:

KSB SE & Co. KGaA

Johann-Klein-Straße 9

67227 Frankenthal (Germany)

The manufacturer herewith declares that 

the product

:

Hya-Duo D FL Compact, Hya-Solo D FL Compact

KSB order number: ...................................................................................................

is in conformity with the provisions of the following Directives as amended from time to time:

– Pump set: EC Machinery Directive 2006/42/EC

– Pump set: Electromagnetic Compatibility Directive 2014/30/EU

The manufacturer also declares that

the following harmonised international standards have been applied:

– ISO 12100

– EN 809

– EN 60204-1

Applied national technical standards and specifications, in particular:

– DIN 14462

– EN 1717

– EN 13077

Person authorised to compile the technical file:

Name
Function 
Address (company)
Address (street, No.)
Address (post or ZIP code, city) (country)

The EU Declaration of Conformity was issued in/on:

Place, date

..............................

5)

.............................

Name

Function

Company

Address

5)

A signed, legally binding EU Declaration of Conformity is supplied with the product.

Summary of Contents for Hya-Duo D FL Compact

















































Reviews: