3 Transport/Temporary Storage/Disposal
12 of 48
Hya-Duo D FL Compact
9. Lift each of the three modules with suitable lifting equipment and carefully
place the modules down at the place of installation.
10. Mount the tank and hydraulic unit on the baseplate. Flange the hydraulic unit
to the tank.
11. Re-connect the plug-type connection between the tank and the control cabinet.
Transporting the complete
break tank package booster
set for fire fighting
Fig. 2:
Transporting the complete break tank package booster set for fire fighting
ü
Transport equipment / lifting equipment suitable for the corresponding weight
has been selected and is on hand.
1. Remove the packaging. Remove the caps from the connection openings.
2. Check for any in-transit damage.
3. Transport the break tank package booster set for fire fighting to the place of
installation.
4. Attach the break tank package booster set for fire fighting to the lifting
equipment as shown. Lift it off the wooden skids. Dispose of the wooden skids.
5. Carefully place down the break tank package booster set for fire fighting at the
site of installation.
3.3 Storage/preservation
CAUTION
Damage during storage due to frost, humidity, dirt, UV radiation or vermin
Corrosion/contamination of the break tank package booster set for fire fighting!
▷
Store the break tank package booster set for fire fighting in a frost-proof,
roofed area.
CAUTION
Wet, contaminated or damaged openings and connections
Leaking or damaged break tank package booster set for fire fighting!
▷
Only remove caps/covers from the openings of the break tank package booster
set for fire fighting at the time of installation.
If commissioning is to take place some time after delivery, we recommend that the
following measures be taken for storing the break tank package booster set for fire
fighting:
Store the break tank package booster set for fire fighting in a dry, protected room
where the atmospheric humidity is as constant as possible.