KSB Hya-Duo D FL Compact, Installation & Operating Manual, Page: 10 / 48

2 Safety
10 of 48
Hya-Duo D FL Compact
2.7 Safety information for maintenance, inspection and installation
▪ Modifications or alterations of the break tank package booster set for fire
fighting require the manufacturer's prior consent.
▪ Use only original spare parts or parts/components authorised by the
manufacturer. The use of other parts/components can invalidate any liability of
the manufacturer for resulting damage.
▪ The operator ensures that maintenance, inspection and installation are
performed by authorised, qualified specialist personnel who are thoroughly
familiar with the manual.
▪ Carry out work on the break tank package booster set for fire fighting during
standstill only.
▪ The pump (set) must have cooled down to ambient temperature.
▪
Pump pressure must have been released and the pump must have been drained.
▪ When taking the break tank package booster set for fire fighting out of service
always adhere to the procedure described in the manual.
▪ Decontaminate break tank package booster sets for fire fighting which handle
fluids posing a health hazard. (
ð Section 8.1, Page 37)
▪
As soon as the work has been completed, re-install and re-activate any safety-
relevant devices and protective devices. Before returning the product to service,
observe all instructions on commissioning. (
ð Section 6.1, Page 26)
▪ Make sure the break tank package booster set for fire fighting cannot be
accessed by unauthorised persons (e.g. children).
▪ Prior to opening the break tank package booster set for fire fighting, pull the
mains plug and wait for at least 10 minutes.
2.8 Unauthorised modes of operation
▪ Always observe the limits stated in the product literature.
▪
The warranty relating to the operating reliability and safety of the break tank
package booster set for fire fighting supplied is only valid if the break tank
package booster set for fire fighting is used in accordance with its intended use.
(
ð Section 2.2, Page 8)