2 Safety
8 of 48
Hya-Duo D FL Compact
2 Safety
!
DANGER
All the information contained in this section refers to hazardous situations.
In addition to the present general safety information the action-related safety
information given in the other sections must be observed.
2.1 General
▪
This operating manual contains general installation, operating and maintenance
instructions that must be observed to ensure safe operation of the system and
prevent personal injury and damage to property.
▪
Comply with all the safety instructions given in the individual sections of this
operating manual.
▪
The operating manual must be read and understood by the responsible specialist
personnel/operators prior to installation and commissioning.
▪
The contents of this operating manual must be available to the specialist
personnel at the site at all times.
▪
Information and markings attached directly to the product must always be
complied with and kept in a perfectly legible condition at all times. This applies
to, for example:
– Flow direction arrow
– Markings for connections
– Name plate
▪
The operator is responsible for ensuring compliance with all local regulations not
taken into account.
2.2 Intended use
▪
The break tank package booster set for fire fighting must only be operated
within the operating limits described in the other applicable documents.
▪
Only operate break tank package booster sets for fire fighting which are in
perfect technical condition.
▪
Do not operate partially assembled break tank package booster sets for fire
fighting.
▪
Only use the break tank package booster set for fire fighting to handle the fluids
described in the product literature of the respective design variant.
▪
Never operate the break tank package booster set for fire fighting without the
fluid to be handled.
▪
Observe the information on minimum flow rates specified in the product
literature (to prevent overheating, bearing damage, etc).
▪
Observe the maximum flow rates indicated in the data sheet or product
literature (to prevent overheating, cavitation damage, bearing damage, etc).
▪
Do not throttle the flow rate on the suction side of the break tank package
booster set for fire fighting (to prevent cavitation damage).
▪
Consult the manufacturer about any other modes of operation not described in
the product literature.