7 Operation
53 of 76
EtaLine Pro
1168.87/01-EN
The KSB Flow Manager app can be used to change the settings for the pump set and
carry out a software update. To download the app, scan one of the following QR
codes.
Table 25:
Bluetooth
Step 1: Activating the Bluetooth functions
▪
Press and hold the control button (OK) for 6 seconds.
– The functions setting mode is active.
Step 2: Selecting Bluetooth
▪
Change the control element until the Bluetooth symbol flashes.
▪
The symbol will light up.
Step 3: Activating/deactivating Bluetooth
1. Connect the pump set to the smartphone while the Bluetooth symbol is
flashing.
Once successfully connected, the Bluetooth symbol lights up for as long as a
connection is present. If a connection could not be established, the Bluetooth
symbol goes out.
7.3.6 External start/stop
CAUTION
External voltage applied to the digital inputs
Damage to the printed circuit board!
▷
Always use a volt-free contact for the digital inputs.
The pump set is started or stopped by an external signal at digital input 1.
Table 26:
Pump start and stop
Contact
Effect
Contact closed / terminals bridged
Pump set starts up.
Contact open / terminals not bridged
Pump set stops.
