3 Transport/Storage/Disposal
12 of 76
EtaLine Pro
1168.87/01-EN
3 Transport/Storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.
3.2 Transport
DANGER
The pump (set) could slip out of the suspension arrangement.
Danger to life from falling parts!
▷
Always transport the pump (set) in the specified position.
▷
The lifting accessories must be tight and without slack.
▷
Observe the information on weights, centre of gravity and fastening points.
▷
Observe the applicable local occupational safety regulations and accident
prevention regulations.
▷
Use tested and approved lifting accessories.
WARNING
Insufficient stability
Risk of crushing hands and feet!
▷
During assembly/dismantling, secure the pump (set)/pump parts to prevent
tilting or tipping over.
To transport the pump/pump set suspend it from the lifting tackle as shown.
1
2
3
Fig. 1:
Transporting the pump set
1
Lifting sling around motor flange
2
Lifting sling around discharge nozzle
3
Lifting strap with eyebolts on the motor (M8 eyebolts not included in the scope of supply)
ü
Transport equipment/lifting equipment suitable for the corresponding weight
(see type series booklet) has been selected and is available.
1. Pump set: Suspend and transport as illustrated.
2. Carefully place down the pump set at the place of installation. Protect it against
damage and secure it against rolling off.
