3 Transport/Temporary Storage/Disposal
15 of 116
CHTRa
3.3 Transport
DANGER
The pump or individual components could slip out of the suspension arrangement
Danger to life from falling parts!
▷
Always transport the pump or components in the specified position.
▷
Observe the information given for the individual components regarding
weights, centre of gravity and fastening points.
▷
Use suitable, permitted lifting accessories, e.g. self-tightening lifting tongs.
▷
Never suspend the pump from its free shaft end.
▷
Observe the applicable local accident prevention regulations.
▷
Use appropriate personal protective equipment.
DANGER
Improper transport
Risk of injury from lifting heavy components!
▷
Select lifting accessories which are suitable for the component weight.
▷
Always use the attachment points provided for the lifting accessories.
▷
Comply with the applicable health and safety regulations.
WARNING
Lack of stability
Serious injuries due to parts tipping over!
▷
Place the pump only on an area designed for this purpose.
▷
Comply with the requirements to be met by the load-bearing capacity of the
floor. Check the load-bearing capacity of the floor. Consult the building
drawing and general arrangement drawing.
▷
Give due attention to the position of the centre of gravity of the pump set.
▷
Refer to the table of weights for the weight of the pump (set) or packaging
unit.
CAUTION
Improper transport
Damage to the pump!
▷
Never use the cast lifting lugs for lifting the entire pump.
▷
The cast lifting lugs provided on the upper casing half are for lifting the upper
casing half only.
CAUTION
Improper transport
Damage to the pump components!
▷
Always protect pump components from direct contact with chains or steel
ropes.
▷
Protect built-on accessories and pipes.
To determine the lifting capacity, pay attention to the position of the centre of
gravity, the angle of spread and permissible bending radii of the lifting accessories
attached to the load to be lifted.
To transport the pump/pump set suspend it from the lifting tackle as shown.
