KSB Calio S, Installation & Operating Manual

Page: 11 / 52

3 Transport/Storage/Disposal
11 of 52
Calio S
1157.8117/01-EN
3 Transport/Storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.
3.2 Transport
CAUTION
Improper pump transport
Damage to the pump!
▷
Never suspend the pump/pump set from the power cable.
▷ Prevent the pump (set) from getting knocked or dropped.
3.3 Storage/preservation
CAUTION
Damage during storage due to humidity, dirt or vermin
Corrosion/contamination of pump (set)!
▷
For outdoor storage cover the pump (set) and accessories with waterproof
material and protect against condensation.
CAUTION
Wet, contaminated or damaged openings and connections
Leakage or damage to the pump!
▷ Clean and cover pump openings and connections as required prior to putting
the pump into storage.
If commissioning is to take place some time after delivery, we recommend that the
following measures be taken for pump (set) storage.
Store the pump (set) in a dry, protected room where the atmospheric humidity is as
constant as possible.
If properly stored indoors, the equipment is protected for a maximum of 12 months.
New pumps/pump sets are supplied by our factory duly prepared for storage.
For storing a pump (set) which has already been operated, observe the instructions
in (
ð Section 6.3.2, Page 29) .
Table 4: Ambient conditions for storage
Ambient condition Value
Relative humidity 80 % maximum
Ambient temperature 0 °C to + 40 °C
▪ Well-ventilated
▪ Dry
▪
Dust-free
▪ Shock-free
▪ Vibration-free