Measuring Computer
BOATRONIC MS /
BOATRONIC MS-420
Quick-reference Instructions for MeasuringThis document does not substitute forreading operating manual 7134.8!
Page 1: ...Measuring Computer BOATRONIC MS BOATRONIC MS 420 Quick reference Instructions for Measuring This document does not substitute for reading operating manual 7134 8 ...
Page 2: ...erence in temperature between the fluid and the environment is 20 K insulate the valves to ensure optimum accuracy NOTE When installing the BOATRONIC MS 420 measuring computer the connectors for the sensor cable and the BOATRONIC MS 420 must be firmly screwed together NOTE For greater ease of handling magnets are fitted in the transducers of the sensor system Direct contact with storage media or o...
Page 3: ...t Calibration selection menu and confirm with the OK key ð The calibration starts ð When the calibration successfully concludes the display reads Initialisation Successful and the measuring computer goes back to the main menu ð The measurement procedure can now be started CAUTION Zero point calibration still active Incorrect measured values or no measurement possible Manual zero point calibration ...
Page 4: ...rm with the OK key ð If the fluid is not known Unnamed liquid can be selected Lower measurement accuracy is the consequence ð The Set concentration step is not required for the Unnamed liquid or Water selections 4 Select the concentration with the keys in the Concentration selection menu and confirm with the OK key ð The specification in percent defines the percentage of the fluid selected in wate...
