7.4
Dismantling the submersible mixer
7.4.1 General information/Safety regulations
WARNING
Work on the submersible mixer by unqualified personnel
Risk of personal injury!
▷
Always have repair and maintenance work performed by specially trained,
qualified personnel.
WARNING
Submersible mixer started up inadvertently
Risk of injury by moving parts!
▷
Always make sure the electrical connections are disconnected before carrying
out work on the submersible mixer.
▷
Make sure that the submersible mixer cannot be started up accidentally.
WARNING
Hot surface
Risk of personal injury!
▷
Allow the submersible mixer to cool down to ambient temperature.
WARNING
Fluids posing a health hzard
Hazard to persons and the environment!
▷
Submersible mixers used in fluids posing a health hazard must be
decontaminated.
▷
Wear safety clothing and a protective mask, if required.
▷
Observe all legal regulations on the disposal of harmful substances.
WARNING
Components with sharp edges
Risk of cutting or shearing injuries!
▷
Always use appropriate caution for installation and dismantling work.
▷
Wear work gloves.
For dismantling and reassembly observe the general assembly drawing. (
NOTE
All maintenance, service and installation work can be carried out by KSB Service. Find
your contact in the attached "Addresses" booklet or on the Internet at
www.ksb.com/
contact
".
7 Servicing/Maintenance
Amamix® direkt
33 of 52
Goodnal STP ST041 Biological Treatment (KSB Amamix Direct Installation and Operation Manual) Vendor Manual
Q-Pulse Id VM385
Active 29/10/2013
Page 33 of 52
