6
5
English
TROUBLE SHOOTING GUIDE
The appliance does not
work.
Check the electrical connection.
The lid of the coffee bean hopper is not correctly closed.
The ground coffee container is not correctly positioned
or the lid is not correctly positioned or is not in place.
The appliance stops during
operation.
The appliance has overheated.
The overheat protection mechanism has been activated.
Unplugged the appliance.
Detach the upper burr for cleaning and remove any
obstacle.
Leave the appliance to cool down for 30 minutes before
next use.
If the appliance is still not working, you have to contact
an approved service center.
Causes of overheating to be avoided:
The maximum capacity of beans in the bean hopper, or
the maximum capacity of ground coffee in the ground
coffee container has been exceeded.
The fineness selector does
not work anymore.
Check that the upper burr is correctly positioned. (See
paragraph concerning the maintenance in the manual).
MAINTENANCE
To keep all your coffee’s aroma and to avoid a degradation of the ground coffee,
empty the ground coffee container after each use.
Always disconnect the grinder before cleaning.
Never place the grinder, power supply cord or plug in water or under running water.
Do not use strong detergents or abrasive pads to clean the appliance.
Clean the lids and the ground coffee container in warm, soapy water.
To remove the upper burr
(5)
, set the fineness selector
(9)
to the fine position then
take hold of the winglets of the upper mill with your fingers and turn clockwise, then
raise it vertically to remove.
(Fig. A)
Clean the upper burr with the cleaning brush
(11)
.
(Fig. B)
Carefully clean the inside of the coffee-bean hopper
(1)
with a damp cloth.
To replace the upper burr, set the fineness selector
(9)
to the coarse position, insert
the burr and turn it once in the counter-clockwise direction.
(Fig. A)
Carefully clean the ground coffee dispenser
(10)
and the body of the appliance with
a damp cloth.
KRUPS INTERNATIONAL LIMITED GUARANTEE
: www.krups.com
This product is repairable by KRUPS during and after the guarantee period.
Accessories, consumables and end-user replaceable parts can be purchased, if locally available,
as described on the KRUPS internet site www.krups.com
The Guarantee
This product is guaranteed by KRUPS (company address and details included in the country list of
the KRUPS International Guarantee) against any manufacturing defect in materials or workmanship
for a period of
2 years
starting from the initial date of purchase or delivery date.
The international manufacturer’s guarantee by KRUPS is an extra benefit which does not affect
consumer’s Statutory Rights.
The international manufacturer’s guarantee covers all costs related to restoring the proven defective
product so that it conforms to its original specifications, through the repair or replacement of any
defective part and the necessary labour. At KRUPS’s choice, an equivalent or superior replacement
product may be provided instead of repairing a defective product. KRUPS’s sole obligation and your
exclusive resolution under this guarantee are limited to such repair or replacement.
Conditions & Exclusions
The international KRUPS guarantee only applies within the guarantee period and for those
countries listed in the country list attached and is valid only on presentation of a proof of purchase.
The product can be taken directly in person to an authorised service centre or must be adequately
packaged and returned, by recorded delivery (or equivalent method of postage), to a KRUPS
authorised service centre. Full address details for each country’s authorised service centres are
listed on KRUPS website (www.krups.com) or by calling the appropriate telephone number as set
out in the country list to request the appropriate postal address.
KRUPS shall not be obliged to repair or replace any product which is not accompanied by a valid
proof of purchase.
This guarantee will not cover any damage which occurs as a result of misuse, negligence, failure
to follow KRUPS instructions, use on current or voltage other than as stamped on the product, or
a modification or unauthorised repair of the product. It also does not cover normal wear and tear,
maintenance or replacement of consumable parts, or the following:
–
using the wrong type of water or consumable
–
damage as a result of lightning or power surges
–
scaling (any de-scaling must be carried out according to the instructions for use)
–
damages or poor results due to wrong voltage or frequency
–
professional or commercial use
–
ingress of water, dust or insects into the product (excluding appliances with features
specifically designed for insects)
–
mechanical damages, overloading
–
accidents including fire, flood, thunderbolt, etc
–
damage to any glass or porcelain ware in the product
This guarantee does not apply to any product that has been tampered with, or to damages incurred
through improper use and care, faulty packaging by the owner or mishandling by any carrier.
In order to offer the best possible after-sales service and constantly improve customer satisfaction,
KRUPS may send a satisfaction survey to all customers who have had their product repaired or
exchanged in a KRUPS authorised service centre.
The international KRUPS guarantee applies only for products purchased in one of the countries
listed, and used for domestic purposes only in one of the countries listed on the Country List.
Where a product purchased in one listed country and then used in another listed country:
