background image

21

Description

Espresso:

A : Espresso lid with filter storage

B : Removable espresso tank

C : Cup warming plate

D : Brewing head

E : Steam nozzle

F : Cappuccino accessory for frothing milk

G : Drip tray grid
H : Drip tray

I

: Filter holder

J

: 1 & 2 cup loose espresso filters

K : Espresso filter for ESE pods (Easy Serving

Espresso)

L : "CLARIS" water filter -Aqua

Filter System F088 (accessory not provided)

M : Loose coffee measuring spoon

N : Start / Stop switch for espresso with

temperature control light (blue)

O : 1 and 2 cup espresso selection button

and access to the programmed quantity
per cup: 

/

 and 

P : Steam hot water and selection button:

and  

S : Blue lit central display

S1 : Scroll button for setting the time and

choosing the automatic mode for the
coffee maker:  

 and  

S2 : OK button: 

Coffee:

a : Coffee maker lid – access to the tank and

filter holder

b : Coffee maker tank

c : Filter-holder housing

d : Filter holder with carrying handle

e : Calibrated water level indicator for the

coffee maker tank

f

: Hinged lid of filter coffee jug

g : Filter coffee jug

h : Coffee warming plate

i

: "Duo Filter XS 1000" water filter
(accessory not provided)

j

: Start/stop filter coffee switch with blue
operating indicator

k : Selection button for programmable mode

and end-of-cycle sound signal: 

 and

l

: Selection button for strong or normal
coffee strength: 

 or 

Safety recommendations

• Please read these instructions carefully

before first using your espresso.The
appliance must only be connected to the
mains via an earthed plug. Check that the
voltage shown on the appliance’s indicator
plate corresponds to that of your electricity
supply. It complies with the requirements of
the EEC Directive (89/336/EEC) and (72/23/
EEC).

• Never put your espresso on a hot surface

(electric warming plate, for example) or close
to a flame. Place on a flat, stable heat-
resistant surface.

• Never remove the filter holder containing

the coffee grounds while water is being
passed through, since the appliance is under
pressure at this time.

• Never use the appliance if the drip tray and

the drip tray grid are not in position.

• Disconnect the electricity if there is any

problem while the coffee is brewing or prior
to cleaning your appliance.

• Never unplug the appliance by pulling on

the cord and never lay the cord across a
sharp edge or the corner of an item of
furniture.

• Do not allow the cord or your hands to

come into contact with the hot parts of the
appliance (cup warming plate, filter holder,
steam nozzle, cappuccino accessory).

• Never immerse the appliance in water.

• Keep away from children and do not allow

the cord to hang down.

• Follow the instructions given for descaling.

• Never start the machine if it is damaged or

not operating correctly or if the cord is in
poor condition.

• If the cord or any other specific part

becomes defective, these can only be
replaced by a Krups approved service centre.
You must never, under any circumstances,
open the appliance yourself, in order to
avoid any danger.

English

XP2070 anglais.P65

7/11/05, 12:32

21

Summary of Contents for EXPRESSO XP2070











Reviews: