KRUEGER KLPP Installation, Start-Up And Service Instructions Manual Download

Page: 8 / 50

Fan Powered Terminal Units IOM

ANALOG ELECTRONIC CONTROLS

Pressure independent control packages are available with

or without hot water or electric heat, automatic or remote

night shutdown, and automatic night setback. All control

arrangements include a standard inlet airflow sensor, control

enclosure, SCR fan speed controller, 24-volt transformer, fan

relay, and wall thermostat to match the control type. See

Tables 2A and 2B.

DIRECT DIGITAL CONTROLS (By Others)

Control sequences are available for factory installation

of numerous field-supplied controls from various

manufacturers including: Andover, Automated Logic,

Invensys (Siebe), Siemens (Landis), Johnson, and others. All

packages include a standard inlet airflow sensor, control

enclosure, SCR fan speed controller, 24-volt transformer,

and fan relay. Contact Krueger for information on mounting

field-supplied controls.

PNEUMATIC CONTROLS

Pressure independent control packages are available with

or without hot water or electric heat, night shutdown and/

or unoccupied heating. All control arrangements include a

standard inlet airflow sensor and SCR fan speed controller.

See Tables 3A and 3B.

Single function controller: Provides single function, i.e., DA-

NO.
Multi-function controller: Capable of providing DA-NO, DA-

NC, RA-NC or RA-NO functions.

NO CONTROL UNITS

Control sequences are also available to provide a control

box on units supplied with no factory-installed controls.

These arrangements include a standard inlet airflow

sensor, control enclosure, SCR fan speed control, 24-volt

transformer, and fan relay. See Table 4.

PACKAGE NO.

DESCRIPTION

2200

Cooling Only

2201

Cooling Only With Automatic Night Shutdown

2203

Cooling Only With Automatic Night Shutdown

2204

Cooling With On/Off Hot Water Heat

2205

Cooling With On/Off Hot Water Heat With Automatic Night Shutdown

2207

Cooling With On/Off Hot Water Heat With Automatic Night Shutdown

2208

Cooling With Proportional Hot Water Heat

2209

Cooling With Proportional Hot Water Heat With Automatic Night Shutdown

2211

Cooling With Proportional Hot Water Heat With Automatic Night Shutdown

2212

Cooling With Up To 3 Stages Of Electric Heat

2213

Cooling With Up To 3 Stages Of Electric Heat W/ Automatic Night Shutdown

2215

Cooling With Up To 2 Stages Of Electric Heat W/ Automatic Night Shutdown

2217

Cooling/Heating with Automatic Changeover

2218

Cooling with Solid State LineaHeat Proportional Heat

PACKAGE NO.

DESCRIPTION

2300

Cooling With Sequenced Fan

2301

Cooling With Sequenced Fan & Automatic Night Shutdown

2302

Cooling With Sequenced Fan & Automatic Night Setback

2303

Cooling With Sequenced Fan & On/Off Hot Water Heat

2304

Cooling With Sequenced Fan & On/Off Hot Water Heat & Automatic Night

Shutdown

2305

Cooling With Sequenced Fan & On/Off HotWater Heat & Automatic Night

Setback

2306

Cooling With Sequenced Fan & Proportional Hot Water Heat

2307

Cooling With Sequenced Fan & Proportional Hot Water Heat & Automatic

Night Shutdown

2308

Cooling With Sequenced Fan & Proportional Hot Water Heat & Automatic

Night Setback

2309

Cooling With Sequenced Fan & Up To 2 Stages Of Electric Heat

2310

Cooling With Sequenced Fan & Up To 2 Stages Of Electric Heat & Automatic

Night Shutdown

2311

Cooling With Sequenced Fan & Up To 2 Stages Of Electric Heat & Automatic

Night Setback

2313

Cooling with Solid State LineaHeat Proportional Heat

2314

Cooling with Solid State LineaHeat Proportional Heat and Automatic Night

Shutdown On Loss Of Primary Air

TABLE 2A – Analog Electronic Control Arrangements –KLPS,

KQFS, QFC

TABLE 2B – Analog Electronic Control Arrangements – KLPP,

KQFP, QFV

Summary of Contents for KLPP



















































Search results

Summary of Contents for KLPP

Reviews:

Related manuals for KLPP

Brands by name

Popular brands

KRUEGER KLPP, Installation, Start-Up And Service Instructions Manual

Search results

Summary of Contents for KLPP

Reviews:

Related manuals for KLPP

Brands by name

Popular brands