manualshive.com logo in svg

Kronos InTouch DX, User Manual

Share
Download
Kronos InTouch DX User Manual Download Page 51

Smart View transactions

51

Respond to Shift Swap Request (Smart View)

Use this transaction to respond to requests for shift swaps from other employees.
1. Tap 

Respond to Shift Swap Request

. The requests for the current pay period 

appear.

2. Tap an employee to view the offered and requested shifts. To view details, tap 

the information icon.

3. Tap 

Refuse

 or 

Accept

.

4. Continue in this manner to accept or refuse any other requests.

View Accruals (Smart View)

Use the View Accruals transaction to view current totals of accrued time, such as 
vacation, personal, and sick time. The totals are accurate as of the time that you 
perform the transaction. Accrual totals information includes the available, ending, 
opening vested, and tracking period balances.
1. Tap 

View Accruals

. A green bar indicates an accrual with a positive balance; 

a red bar indicates an accrual with a negative balance.

Summary of Contents for InTouch DX





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands