Kronos InTouch DX, User Manual

Page: 129 / 132

Run Tests
129
Display
Note : You can execute the Display test, Tone test, and LED test as a group by
running the Sequential test. See “Sequential” on page 127.
This test ensures that the timeclock’s screen is operating properly.
1. Tap
Run Tests .
2. Tap Display . A pattern of vertical bars in each of the following color
arrangements appears:
–
Red, green, blue, black, white.
– Green, blue, black, white, red.
– Blue, black, white, red, green.
– Black, white, red, green, blue.
– White, red, green, blue, black.
Tone
This test ensures that the timeclock’s beeper is operating.
1. Tap
Run Tests .
2. Tap Tone . The device emits a tone during this test. If the test is successful, the
message “Tone Detected” appears.
LED
This test ensures that the timeclock’s LED lights are working.
Note: This test does
not
test the LED light on an attached remote reader.
1. Tap Run Tests .
2. Tap LED . If the test is successful, the lights flash, in succession, red, green,
and yellow.