Kronen Nako KC-32 Translation Of The Original Instruction Manual Download

Page: 30 / 30

Manual KC-32 and KC-52 Nako

11.

Index

Circuit plan ....................................................................................................... 29

Cleaning ........................................................................................................... 22

Connected load ................................................................................................ 10

Controls ............................................................................................................ 14

Customer service ............................................................................................. 27

Declaration of Conformity ................................................................................. 28

Defects and Claims ............................................................................................ 5

Disposal .............................................................................................................. 7

Emergency Turn Off

......................................................................................... 19

Error correction ................................................................................................. 24

Filler funnel ....................................................................................................... 21

Included in delivery ........................................................................................... 11

Intended place ............................................................................................ 10, 16

Knife

........................................................................................................... 12, 20

Maintenance Schedule ..................................................................................... 25

Packaging ......................................................................................................... 15

Rotary switch .................................................................................................... 12

Safety Appliance .............................................................................................. 14

Scraper ................................................................................................. 12, 13, 21

Terms and Conditions of Warranty ..................................................................... 6

Transportation .................................................................................................. 15

Turning off

........................................................................................................ 19

Turning on

........................................................................................................ 18

Type plate ......................................................................................................... 11

Summary of Contents for Nako KC-32































Search results

Summary of Contents for Nako KC-32

Reviews:

Related manuals for Nako KC-32

Brands by name

Popular brands

Kronen Nako KC-32, Translation Of The Original Instruction Manual

Search results

Summary of Contents for Nako KC-32

Reviews:

Related manuals for Nako KC-32

Brands by name

Popular brands