manualshive.com logo in svg

Krone Vendro 680, Operating Instructions Manual, Page: 82 / 104

Share
Download
Krone Vendro 680 Operating Instructions Manual Download Page 82

11

Maintenance – General

11.6

Cleaning the machine

82

Vendro 680

Original operating instructions 150001223_01_en

11.6

Cleaning the machine

 WARNING

Eye damage caused by flying dirt particles!

When cleaning the machine with compressed air or with high-pressure cleaner, the dirt
particles are slung away at high speed. The dirt particles may hit the eyes and hurt them.

„

Keep persons away from working range.

„

When performing cleaning work with compressed air or with high-pressure cleaner, wear
suitable working clothes (for example eye protection).

NOTICE

Machine damaged by water from a high-pressure cleaner

Bearings and electric or electronic components can be damaged if you aim the water jet of a
high-pressure cleaner directly at them during cleaning.

„

Never direct the water jet of a high-pressure cleaner at bearings, electric/electronic
components or safety labels.

„

Replace missing, damaged and unrecognisable safety labels.

ü

The machine is shut down and safeguarded, 

see Page 24

.

„

After each use, remove husk and dust from the machine.

Æ

Under very dry working conditions, repeat the cleaning several times a day.

Summary of Contents for Vendro 680









































































































Reviews:

No comments