manualshive.com logo in svg

Krone Vendro 680, Operating Instructions Manual, Page: 73 / 104

Share
Download
Krone Vendro 680 Operating Instructions Manual Download Page 73

Settings

10

Adjusting mechanical dampers

10.5

Vendro 680

Original operating instructions 150001223_01_en

73

Adjusting the locking

1

1

I

II

KW000-263

I Working position

II Transport position

„

Swivel the locking (1) upwards for the working position.

„

Swivel the locking (1) downwards for the transport position.

10.5

Adjusting mechanical dampers

As the machine is raised into transport position, During this process, the dampers move to the
stop and keep the machine centred behind the three-point hitch. The dampers should be
pretensioned to increase the driving comfort on roads and rough tracks and to prevent the
machine from rocking.

2

3

1

1

2

KW000-310

„

Increase the pretension of the dampers (3) via the screws (1) of the friction plates (2) to
suppress the rocking of the machine.

NOTE! To prevent the dampers from jamming, ensure that the pretensioning of the
friction plates is not too strong!

Summary of Contents for Vendro 680









































































































Reviews:

No comments